-
Membrānas tips
Cardioid
-
Krāsa
Melna
The DTP 640 REX is a dual-element microphone specifically designed to capture the sound of your drums and percussion instruments. It consists out of two phase-aligned capsules, a condenser and a dynamic one. You can switch between three sounds for more flexibility for studio and live applications. We put two phase-aligned microphones in a single housing. The dynamic side ensures accurate attack reproduction of the kick drum, while the condenser element captures the drum’s low end. Each element has a dedicated output.Dynamic =//= Condenser
Both elements with neutral frequency response.Dynamic +//= Condenser
Dynamic element boosts frequencies between 3 and 5 kHz; condenser stays neutral.Dynamic +//+ Condenser
Dynamic boosts the range of 3-5 kHz, condenser boosts frequencies 70-150 Hz to deliver full-bodied sound.Type
Dynamic, moving coil, Condenser, permanently polarizedAcoustical operating principle
Pressure gradient transducerTransducer Ø
31.7 mm, 1.25 inTransducer Ø
22.4 mm, 0.88 inPolar pattern
CardioidFrequency range (dynamic)
20 … 16,000 HzFrequency range (condenser)
20 … 20,000 HzEFR, ‘Enhanced Frequency Response’ settings
Sensitivity, = // = FFR
0.4 mV/Pa (-69 dBV), dynamic
2 mV/Pa (-54 dBV), condenserSensitivity, + // = Dynamic EFR
0.4 mV/Pa, -69 dBV/Pa, dynamic
2 mV/Pa, -54 dBV/Pa, condenserSensitivity, + // + Dual EFR
Condenser and dynamic matched at 1 mV/Pa, -60 dBVEquivalent noise level
28 dB (A)Max. SPL for 0.5 % THD
150 dBSPL, 0 dB pre-attenuationDynamic range of mic. amp. (condenser)
122 dBPre-attenuation pad
0 dB
-10 dB
-20 dBRated impedance dynamic
500 ΩRated impedance condenser
200 ΩSupply voltage
48 V ± 4 VCurrent consumption
2 mAConnector
Gold plated 3-pin and 5-pin XLRCable
1.5 m (4.95’) dual shielded Y-cable, 5-pin XLR into two 3-pin XLRsMicrophone dimensions
71 dia. x 158 mm, 2.8 dia. x 6.2 inMicrophone net weight
755 g, 27.3 ozMore Info: Lewitt DTP 640 REX
