-
Membrānas tips
Multi-Pattern
-
Krāsa
Melna
The LCT 940 unifies the specific characteristics of a premium large diaphragm FET condenser microphone and a top-notch tube microphone.With “Tube” you get warmth and musical harmonics, while “FET” gives you clear and nuanced sound. Blend tube and FET circuit at any ratio and find your ideal mix. The LCT 940 features a total of nine different polar patterns.There is a user interface on the remote control for a quick and accurate setup of pattern, pre-attenuation, and low-cut. Easily check or change the settings, even in complete darkness due to its illuminated user interface. The power supply unit is integrated.By using the AMPLIFICATION knob, you can mix the two distinct microphone circuits, FET and tube circuit at any ratio to find your sweet spot.This way you can dial in the ideal combination of warmth, punch, and clarity. Works brilliantly to adapt the LCT 940 to different voices.Type
Condenser, externally polarizedAcoustical operating principle
Pressure gradient transducerTransducer Ø
25.4 mm, 1 inPolar pattern
Omni, wide cardioid, cardioid, supercardioid, figure-8, four intermediate patternsFrequency range
20 … 20,000 HzSensitivity
23 mV/Pa, -33 dBV/Pa (cardioid)
20 mV/Pa, -34 dBV/Pa (omni)
23 mV/Pa, -33 dBV/Pa (figure-8)Equivalent noise level (FET)
8 dB (A), cardioid
9 dB (A), omni
8 dB (A), figure-8Equivalent noise level (Tube)
12 dB (A), cardioid
13 dB (A), omni
12 dB (A), figure-8Max. SPL for 0.5 % THD (FET)
143 dBSPL, 0 dB pre-attenuationMax. SPL for 0.5% THD (Tube)
140 dBSPL, 0 dB pre-attenuationSignal / noise ratio (FET)
86 dB (A)Signal / noise ratio (Tube)
82 dB (A)Dynamic range of FET mic. Amp.
135 dBDynamic range of Tube mic. Amp.
128 dBPre-attenuation pad
0 dB
-6 dB
-12 dB
-18 dBLow-cut filter
linear
40 Hz (12 dB/oct)
150 Hz (6 dB/oct)
300 Hz (6 dB/oct)Internal impedance
200 ΩRated load impedance
1,000 ΩPSU – supply voltage
230 V, 50 Hz
110 V, 60 HzCurrent consumption
170 mAConnector
Gold plated 11-pin XLRMicrophone dimensions
192 x 60 x 46 mm, 7.5 x 2.4 x 1.8 inPSU dimensions
250 x 150 x 70 mm, 9.8 x 5.9 x 2.8 inMicrophone net weight
662 g, 23.3 ozPSU net weight
1930 g, 68.1 ozMore Info: Lewitt LCT 940
