KAZU V2 is a high-end power supply in a slim 4 TE format. Interference and voltage peaks are minimal. As a result, modules connected to the KAZU V2 deliver exceptionally low-noise, honest sound. The maximum current values are 1500 mA to +12 V and -12 V. Thanks to high precision and stability, operation close to full load is no problem. Planning headroom? Heat problems? Not with KAZU!

KAZU V2 is a switch-mode power supply specially developed for modular systems, which can be used with a Flying Bus Board or EVE-1 Bus Board (sold separately). Thanks to extremely low interference and voltage peaks, modules connected to this PSU deliver crystal-clear sound. It is also worth mentioning that KAZU V2 hardly heats up at all, even under high load. Protection against short circuits and overvoltages has, of course, also been implemented.

KAZU V2 offers the following performance data:

    +12 V: Regulated, filtered. Less than 2 mV fluctuation and noise at full load. Typically 1.5 mV.
    -12 V: Regulated, filtered. Less than 2 mV fluctuation and noise at full load. Typically 1.5 mV.

Maximum current output:

    1500 mA to +12 V
    1500 mA to -12 V

• Please note: Kazu V2 does not have a 5V rail. To supply modules with 5V we recommend using a regulator like: Doepfer A-100 5V Adapter
• The necessary external +15VDC/5A AC adapter is not included.