Adam Audio S6X
Adam Audio S6X
In stock
Estimated Shipping Widget will be displayed here!
Description / Specs
Description / Specs
The S6X main monitor is designed for large control rooms and film studios. It uses a symmetrical concept to increase the realistic reproduction of ADAM Audio monitors at higher sound pressure levels. ADAM Audio has avoided the typical bass range overloading often found in main monitors. A wide horizontal radiation pattern and moderate vertical beaming are crucial factors to minimize the impact of ceiling and floor reflections and achieve neutral sound reproduction at high volumes.
Extended D’Appolito design
A total of seven individual speakers were arranged to allow gradual transitions given the cabinet size. Additionally, we chose a horizontal symmetry that can be described as an extended D’Appolito configuration. This design, combined with suitable crossover frequencies and filter slopes, results in radiation patterns that produce very consistent reproduction characteristics in the horizontal center position. At the same time, vertical dispersion is reduced, greatly minimizing reflections from the ceiling, floor, or mixing console. Thus, so-called ‘early reflections’ have less chance to interfere, leading to significantly better stereo imaging and a more three-dimensional sound.
Impulse Coupling
Further development progress was achieved by using Alucore® panels, an extra rigid component material with an aluminum honeycomb core. All drivers of the S6X and S7A Mk2 are mounted on these panels, which significantly improves mechanical coupling between the drivers and the cabinet.
The S6X: accuracy and power
A number of innovative approaches combined with uncompromising effort in all sonically relevant areas make the S6X one of the largest and most sophisticated active monitors currently available. The horizontal symmetry design carefully balances harmonic and generous diaphragm area proportions to achieve not only a flat frequency response but also consistent dynamic behavior across the entire frequency range. Complex orchestral structures can be easily analyzed and spatially arranged on the S6X. Extensive control options on the front panel allow adjustment to different acoustic environments or personal preferences.
Amplification
The built-in amplifiers are coupled as directly as possible to the respective drivers so that remote amplifier units do not compromise the advantages of active technology. One 500 Watt amplifier is assigned to each 12″ woofer, while 250 Watt units are used for the other frequency bands. This main monitor combines very high accuracy with exceptional power: SPL peaks well beyond 130 dB are produced without any compression or harshness. The S6X is an excellent choice for large control rooms and film or sound studios.
Control panel
In addition to the input sensitivity that can be adjusted within ±10 dB, there are four other level controls affecting the individual amplifier modules. Shelving filters at both ends of the frequency spectrum and three fully parametric equalizers help compensate for standing waves in the control room. The EQs can be applied separately or grouped so their effect can be directly evaluated.
TECHNICAL DATA
WOOFER
- Number - 2
- Basket Ø 12" (305 mm)
- Voice Coil Ø 3" (75 mm)
- Cone Material HexaCone
MIDRANGE (CONE)
- Number - 2
- Basket Ø 7.5" (186 mm)
- Voice Coil Ø 2" (50 mm)
- Cone Material HexaCone
MIDRANGE
- Number - 2
- Type X-ART
- Diaphragm Area 2 x 26 inch² (16800 mm²)
- Equiv. Diaphragm Ø 2 x 5.5" (146 mm)
- Velocity Transform Ratio 3.5:1
- Diaphragm Weight 0.7 g
TWEETER
- Number - 1
- Type X-ART
- Diaphragm Area 4 inch² (2420 mm²)
- Equiv. Diaphragm Ø 2" (56 mm)
- Velocity Transform Ratio 4:1
- Diaphragm Weight 0.17 g
BUILT-IN AMPLIFIERS
Woofer - 2
Type - PWM
Amp. Power - RMS / Music 500 W / 700 W
Midrange (cone) - 2
Type - PWM
Amp. Power - RMS / Music 250 W / 350 W
Midrange - 2
Type - PWM
Amp. Power - RMS / Music 250 W / 350 W
Tweeter - 1
Type - PWM
Amp. Power - RMS / Music 250 W / 350 W
CONTROL PANEL
Input Sensitivity ±10 dB
EQ 80 Hz (Q / Hz / Level) 3 x 0.2 - 20 / 20 - 200 / ±12 dB
High Shelf EQ > 6 kHz ±6 dB
Low Shelf EQ < 150 Hz ±6 dB
Sub Gain ±4 dB
Mid-Woofer Level ±2 dB
Mid Level ±2 dB
Tweeter Gain ±4 dB
INPUT CONNECTORS
Analog XLR
GENERAL DATA
Panel - Front
X-Curve Filter - Yes
Frequency Response - 23 Hz - 50 kHz
THD 90 dB / 1 m > 100 Hz ≤0.5 %
Max. SPL with sine wave acoustic - 100 Hz to 3 kHz at 1 m ≥123 dB
Max. SPL per pair at 1 m ≥133 dB
Crossover Frequencies - 85 / 800 / 3100 Hz
Input Impedance - 10 kOhm
Weight - 213.8 lb (97 kg)
Magnetically Shielded - No
Height x Width x Depth - 28.5" (720 mm) x 37" (940 mm) x 19.5" (490 mm)
Warranty - 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents - Power cord, manual
More info: S6X
