Kenton USB SOLO Converter
Kenton USB SOLO Converter
In stock
Estimated Shipping Widget will be displayed here!
Description / Specs
Description / Specs
Description
Since it both connects and is powered directly via USB, the USB Solo is all you need to control an analog synthesizer from a computer. With no MIDI interface required and no external power supply, cable clutter is minimized. The USB Solo still maintains the famous Kenton tuning stability, as well as full scale range on the CV and auxiliary outputs thanks to its internal power circuitry.
The CV output can operate at 1V/Oct, Hz/Volt, or 1.2V/Oct. The scaling and tuning are adjustable to accommodate any unruly synths. The Gate output can work at several different voltage levels and can also be set to work as an S-trig instead. Additionally, the USB Solo features a Sync24 output, so your vintage Roland equipment can join in as well.
The USB Solo is a class-compliant USB MIDI device and does not require installing any drivers—just plug and play.
Features
Power: Supplied by the USB host device via the USB cable
Dimensions: 130 x 97 x 40 mm
Weight: 450g
MIDI: In & Out (via USB)
Analog Outputs: CV on 3.5mm mono jack (V/oct or Hz/V or 1.2V/oct)
Gate on 3.5mm mono jack (Gate or S-trig – with or without pull-ups)
Aux1 on 3.5mm mono jack (CV and Aux 1 use 16-bit DAC for rock-steady pitches)
Digital Outputs Aux2 & Aux3 on 3.5mm mono jacks (off=0 volts on=+5 volts)
Sync 24 on 5-pin 180-degree DIN socket
USB Connector Type B socket – USB A to B cable supplied, 1.8 meters
Please refer to the manual for more details
Designed to control all types of mono synths
Super-fast response time
Famous Kenton build quality
Rugged brushed aluminum case
CV and Aux1 outputs use high-spec 16-bit D/A converters for rock-steady pitches
Gate / S-trig output configurable to match virtually any synth
Aux2 & Aux3 outputs are on-off only (zero or 5V)
Dedicated DIN socket output for Sync24
CV/Gate/Aux1,2,3 outputs on 3.5mm jack sockets (3.5mm to 1/4″ cables are available in our cables section)
Any MIDI channel can be selected
Switchable for V/oct & Hz/V & 1.2V/oct scaling systems
Fine tune & scale are software controllable
Transpose (coarse tune) – up & down 12 semitones
Adjustable pitch bend range
Programmable Gate V-trig (up to 15V) or S-trig (with or without pull-up)
Multiple and single trigger modes – adjustable re-trigger time
Note priority selection – newest / lowest / highest
Old notes are remembered to facilitate trill effects and increase playability
Portamento – fixed rate or fixed time modes
Auto Portamento mode selectable (where legato playing turns on Portamento)
Portamento Controller is selectable
Programmable Auxiliary outputs controllable by any MIDI controller
Programmable LFO – 9 wave shapes including random
LFO can modulate pitch &/or AUX output
Separate Controllers for LFO to CV and LFO to AUX
LFO can be synchronized to MIDI clock
LFO sync point can be selected
Key-on can reset LFO
Aux3 output can output clock – Aux2 can output stop-start
Clock output can select from 1 to 12, 24, or 48 clocks per quarter note
All parameters are controllable in real-time by SysEx
Setups are stored in non-volatile memory for easy recall
40 memory locations for store / load
MIDI monitor mode – for easy MIDI troubleshooting
USB powered
Size 130mm x 97mm x 40mm
Suitable for use with XP / Vista / MAC OS-X v10.2 onwards / Linux
Improvements over Pro-Solo mkII
USB connection – faster data transfer
Has 40 memories which can be stored and recalled
Setups pre-loaded for popular synths
Dedicated DIN Sync-24 output
Aux 2 & 3 on 3.5mm jacks
Variable gate-off time for re-trigger (multiple trigger)
LFO start point can now be selected for Sample & Hold too
Aux 2 & 3 have adjustable threshold
Program changes can be used to recall memories
Manual you can find here: MANUAL
