Vermona’s second Eurorack module is a very flexible yet affordable MIDI/CV interface that can be up to four-voice polyphonic. You can use it as four independent interfaces or in a mixed mode with simultaneous monophonic and polyphonic modes.

Each of the "output channels" has a CV output with 1V/octave, a gate output, and two additional control voltage outputs for MIDI controllers like modulation wheel and pitch bend wheel.

The output channels can be combined arbitrarily with each other or used completely independently with different MIDI channels. Combined output channels can be unison, monophonic with rotating voice assignment, or polyphonic.

There are three clock divider outputs that convert incoming MIDI clock signals into analog gate voltages.
A reset output allows, for example, keeping step sequencers (with a corresponding reset input) in sync via MIDI start/stop commands.
With the gate input, you can switch between the play modes M1 and M2 using a gate signal.

An important part of the concept is the simple use of all parameters without a display or complicated menu structures.

Features:

• pitch CV: 1V/octave
• Gate voltages: 10V
• CV1, CV2: 0-5V (or -2.5V to +2.5V with pitch bend)
• legato function switchable per output channel
• clock outputs (10V): 1/4, 1/8, 1/16, and 1/8T (can be doubled)
• RESET output: 10V at MIDI STOP, 0V at MIDI START or CONTINUE